50kg Industrial Manipulators: Flexible & Optimized Factory Lifting Solutions

Are you looking for a 50kg assist manipulator to lift, move, and position goods and materials in your factory? Vietmani provides assist manipulator solutions with various options for installation methods, control modes, and End Effectors, meeting diverse lifting needs in production.

Depending on the total load, size, and center of gravity of the lifting object, the working radius, operation frequency, and factory space, Vietmani can consult on suitable configurations such as fixed column manipulators, mobile column manipulators, or overhead KBK rail systems.

In particular, Vietmani specializes in custom-designed assist manipulators, helping you choose the right solution from the start rather than relying solely on the 50kg capacity figure.

Vietmani 50kg assist manipulators – What are the options?

Not every 50kg load lifting location in a factory has the same installation conditions. Depending on the workspace, movement range, and production line layout, Vietmani offers various installation methods for assist manipulators, most commonly floor-mounted fixed columns, mobile columns, and overhead aluminum KBK rail suspensions.

Floor-mounted fixed column manipulator

A fixed column assist manipulator is a suitable choice for workstations with defined lifting and lowering positions. The equipment is securely mounted to the floor, creating a stable operating zone for operators to lift, move, rotate, and position loads.

For lifting needs of around 50kg, the fixed column configuration can be selected when businesses need to handle materials repetitively in a specific area, such as machine feeding, unloading products from machines, or transferring parts between locations within the same station.

The advantage of this method is its compact structure, independent arrangement, and easily definable working range according to the actual layout. Vietmani can combine the manipulator with a specialized End Effector to suit each type of load.

Mobile column manipulator

If a manipulator needs to be used at multiple different locations, a mobile column configuration offers much higher flexibility compared to a fixed system.

The entire manipulator assembly is mounted on a mobile base, allowing you to move the equipment to the required operating area without being permanently installed at a single station. This is an option to consider when the factory has multiple production areas or the equipment usage needs change across different production stages.

With a load capacity of around 50kg, the mobile column manipulator can be configured to assist with tasks such as lifting and moving components, molds, materials, or production parts between locations within the factory.

Overhead manipulator on aluminum KBK rail system

When it is necessary to move loads between multiple locations in the same production area, an overhead manipulator suspended on an aluminum KBK rail system is a highly viable option.

The manipulator is connected to the rail system, allowing the equipment to travel along a pre-arranged route rather than being limited to the range of a fixed column. This solution is particularly suited for production lines with multiple pick-up and drop-off points, while also helping to free up floor space for production activities.

For a 50kg lifting requirement, Vietmani can consult on an overhead manipulator combined with KBK rails based on the rail route length, operating range, workstation locations, and load characteristics.

However, a 50kg capacity alone is not enough to determine the manipulator configuration. For an accurate selection, you must also consider the actual total load, load center, working radius, lifting stroke, operation frequency, and gripping method. This information also serves as the basis for Vietmani to choose the appropriate control mode and End Effector for each application.

Why shouldn't you choose a manipulator based solely on a 50kg load capacity?

50kg is a critical specification, but it is insufficient to determine the proper assist manipulator configuration. Besides the load weight, you need to consider the actual total load including the End Effector/fixture, load center, load dimensions, working radius, lifting stroke, operation frequency, and installation space. With the same 50kg load capacity but across two different production processes, the manipulator solutions might be completely different.

To better understand how to determine load capacity and select the suitable manipulator configuration, you can refer to the article [Checklist for calculating actual load before choosing industrial lifting equipment]. With information about the lifting object and actual working conditions, Vietmani can consult on the manipulator configuration, control mode, and End Effector tailored to your needs.

Vietmani custom-designs 50kg assist manipulators

Every production line has a different layout and operation requirements. Therefore, an assist manipulator does not necessarily have just one fixed configuration. Vietmani can consult on and design solutions based on the lifting object, actual total load, operating range, usage frequency, and installation space of each factory.

Depending on your needs, you can choose a fixed column manipulator, a mobile column manipulator, or an overhead KBK rail system, combined with a control mode and an End Effector suited to the load. The goal is to create a system that helps you lift, move, and position loads more conveniently while fitting seamlessly into the actual production process.

Need consultation on a 50kg assist manipulator?

You simply need to provide Vietmani with some basic information such as the weight and dimensions of the object, operation photos/videos, pick-up and drop-off locations, movement range, and usage frequency. From there, Vietmani can evaluate the requirement and propose a suitable manipulator configuration.

Contact Vietmani for consultation on custom 50kg assist manipulator solutions. Hotline: 0931 782 489.